In short: To bill residents, a community first finds out how each utility reaches it, then checks which methods state law and the utility's rules allow. This guide covers three: a submeter at each home, a formula share of the bill (RUBS), and a flat charge or inclusion in the rent. In California, each separately billed charge goes on its own line.
This guide walks through billing residents for utilities in a manufactured housing community (often called a mobile home park), one step at a time. A space is the lot a home sits on. Each state sets its own rules, and Sentinel publishes a state's answer only after researching it to its statutes. California's rules, from state law, the utility's rules and the rental agreement, are given at each step below. An investor-owned utility means a privately owned gas or electric company regulated by the California Public Utilities Commission, and management means the people who run the community; our utility billing glossary explains the other terms.
Step 1: Find Out How Each Utility Reaches the Community
Do this for each utility separately, because each can arrive a different way:
- Direct service: the utility has a meter at each home and bills each resident itself. The community has nothing to bill for that utility.
- A master meter with submeters: the utility bills the community for one meter, and a submeter at each space measures each home's use. See our submetering guide.
- A master meter with no submeters: the utility bills the community, and nothing measures each home's use.
Step 2: Confirm the Right to Bill It Separately
Billing a utility apart from the rent depends on the rental agreement and state law. In California:
- Where the rental agreement does not provide otherwise, management may bill a resident separately for utility service fees and charges the utility assessed for service to the spaces (Cal. Civ. Code § 798.41(a)). The section covers gas or propane, electricity, water, cable television, trash and sewer (same subdivision).
- Those separate charges are not treated as rent, or as a rent increase, under a local rent-control rule, provided that when separate billing begins, the rent is reduced at the same time by the average amount the community was charged for that utility for that space over the 12 months before it gave notice of the change (same subdivision).
- The section does not apply to rental agreements made before January 1, 1991, until they are extended or renewed on or after that date (§ 798.41(b)).
Our § 798.41 page explains the conversion in full.
Step 3: Use a Method the Law Allows for That Utility
| Method | How the charge is set | California's rule |
|---|---|---|
| Submeter | From each home's own meter readings | Gas and electricity from an investor-owned utility at the utility's direct rate (Pub. Util. Code § 739.5(a)); water and sewer bought from a water company, city or district only by the methods the Civil Code lists (Civ. Code § 798.40(c)) |
| Formula share (RUBS) | The community's bill divided by a formula, such as occupants or square footage | Not for gas or electricity from an investor-owned utility served through a master meter (Pub. Util. Code § 739.5(a)); for water and sewer without submeters, see the California rules guide |
| Flat charge, or included in the rent | A set amount, or no separate charge because the rent covers it | Not a flat charge for gas or electricity from an investor-owned utility through a master meter (Pub. Util. Code § 739.5(a)). Management may bill separately the fees and charges the utility assessed for service to the spaces (Civ. Code § 798.41(a)) |
Because each utility has its own rule, as the table shows, the method can differ from one utility to the next. Our RUBS guide shows how a formula share is worked out, and our manufactured housing utility billing guide compares the methods in more detail.
Step 4: Read the Meters and Work Out Each Charge
For a submetered utility, read every submeter at the end of each billing period and record each reading and its date; the home's use is the closing reading minus the opening reading. Then price it by the method from step 3. In California:
- Each billing period's statement shows the opening and closing readings (Cal. Civ. Code § 798.40(a)) and their dates (Cal. Code Regs., tit. 4, § 4090).
- A submetered water usage charge never includes water used by or for any common area facility, or by anyone other than the resident billed (Cal. Civ. Code § 798.40(c)(1)(D)), so when a resident moves out, a reading that day separates the leaving resident's use from the next resident's.
- A billing fee is allowed on some utilities and not others; our billing fee guide gives the answer for each.
Step 5: Issue a Statement That Shows Its Work
A resident should be able to check each charge from the statement. In California the statement must show:
- Each separately billed utility charge stated separately, with the expiration date of any charge of limited duration (Cal. Civ. Code § 798.41(d)).
- For a submetered utility, the period's charges with the opening and closing readings (Cal. Civ. Code § 798.40(a)), and, for each utility, the readings' dates, the rates and quantities for each price step (block) of the rate, and the total charge (Cal. Code Regs., tit. 4, § 4090).
- For gas or electricity, an itemized bill generally in the form of the utility's own residential bill (Cal. Pub. Util. Code § 739.5(e)).
- When a billing company prepares the billing, its name, address and telephone number (Cal. Civ. Code § 798.40(b)).
- For a resident who qualifies for CARE, the discount, either as an itemized amount or as a note that the resident is receiving it (Cal. Civ. Code § 798.43.1(c)).
The community also posts the current residential rate schedule, or its web address with a free copy on request (Cal. Civ. Code § 798.40(a)).
Step 6: Pass Discounts and Credits Through
In California, the community passes these on:
- The full CARE discount goes to each resident who qualifies for the CARE rate (Cal. Civ. Code § 798.43.1(c)). Our CARE and FERA guide explains how.
- Each current resident gets the share of a gas or electric utility's rebate that the resident's use in the last billing period bears to everything the utility delivered to the community in that period (Cal. Pub. Util. Code § 739.5(b)(1)).
Step 7: Keep the Records
In California the rate schedules and each resident's billings are kept for at least 12 months and made available for inspection and copying by the resident and the county sealer (Cal. Code Regs., tit. 4, § 4090).
Frequently Asked Questions
How do you bill tenants for utilities in a mobile home park?
In a manufactured housing community, unless the utility bills each resident directly, residents are billed by one of the methods this guide covers: from a submeter at each home, by a formula share of the community's bill (RUBS), or by a flat charge or inclusion in the rent, and the method can differ from one utility to the next. In California, gas and electricity from an investor-owned utility served through a master meter are charged at the utility's direct rate, with the meter readings on the bill (Cal. Pub. Util. Code § 739.5(a), (e)), and submetered water only by the methods the Civil Code lists (Cal. Civ. Code § 798.40(c)).
Do I need a submeter to bill a resident for utilities?
Not for every utility, but it depends on the state and the utility. In California, gas and electricity from an investor-owned utility served through a master meter must be charged at the rate the resident would pay as the utility's direct customer (Cal. Pub. Util. Code § 739.5(a)), and the itemized bill shows the opening and closing meter readings (§ 739.5(e)), so they are billed from a meter. Water and sewer without submeters are a different question; our California rules guide covers it.
Can a community charge residents for common-area water?
Not in the usage charge for submetered water in California: the usage charge may never include water used by or for any common area facility, or by anyone other than the resident billed (Cal. Civ. Code § 798.40(c)(1)(D)).
What must a utility statement show in California?
Each separately billed utility on its own line (Cal. Civ. Code § 798.41(d)); for a submetered utility, the opening and closing readings and their dates, the rates and quantities for each price step (block) and the total charge (Cal. Code Regs., tit. 4, § 4090; Cal. Civ. Code § 798.40(a)); and, when a billing company prepares the billing, its name, address and telephone number (§ 798.40(b)).
Can I add a billing fee to residents' utility bills?
It depends on the utility. In California, one capped fee is allowed on submetered water and sewer (Cal. Civ. Code § 798.40(c)(3)), and none on gas or electricity from an investor-owned utility apart from the CPUC gas safety surcharge on gas (Cal. Pub. Util. Code §§ 739.5(a), 4358(c)). Our billing fee guide gives the answer for each utility.
Sources
Every statement of law above cites its section. Sources read on November 15, 2026.
- Cal. Pub. Util. Code § 739.5 — master-metered gas and electric service
- Cal. Civ. Code § 798.40 — statements, rate posting and submetered water
- Cal. Civ. Code § 798.41 — billing utilities separately from rent
- Cal. Civ. Code § 798.43.1 — the CARE discount in master-metered communities
- Cal. Pub. Util. Code § 4358 — the mobilehome park gas safety surcharge
- Cal. Code Regs., tit. 4, § 4090 — submeter billing records and invoices