In short: A master meter is a single utility meter that measures the gas, electricity or water delivered to a whole community, and the utility bills the community for it. A submeter is a meter at one space, owned or provided by the community, that measures that home's own use so the community can bill its resident for it.
Master Meters and Submeters, Defined
A master meter is one utility meter for a whole community, or a group of its homes. The utility delivers gas, electricity or water to it and bills the community for the total. In California's statutes the community is the utility's “master-meter customer” (Cal. Pub. Util. Code § 739.5(a); Cal. Civ. Code § 798.40(c)).
A submeter is a meter at one space (the lot a home sits on), past the master meter, that measures what that one home used. The community bills each resident from it.
Electricity
An electric master meter measures the electricity delivered to the community. An electric submeter is a watt-hour meter at each space that measures, in kilowatt-hours (the measure electricity is sold by), what that home used. California's weights-and-measures regulation calls it an “electric watt-hour submeter” (Cal. Code Regs., tit. 4, § 4070, Table 1).
Gas
A gas master meter measures the natural gas delivered to the community, and a gas submeter at each space measures what that home used. Handbook 44, the national weights-and-measures code described below, treats gas submeters as hydrocarbon gas vapor-measuring devices, a class that covers natural gas and propane measured as a vapor; that code does not apply to gas meters operated in a public utility system, such as the utility's own meter (NIST Handbook 44, § 3.33, A.1–A.2). California's regulation lists the “hydrocarbon vapor submeter” (Cal. Code Regs., tit. 4, § 4070, Table 1).
Water
A water master meter measures the water a water company delivers to the community. A water submeter at each space measures what that home used. California's Civil Code defines a submeter as a device that measures one space's water use and that management (the community's management) owns and operates (Cal. Civ. Code § 798.40(d)(2)).
Who Owns and Reads Each Meter
| Meter | Who reads it and bills from it | Who owns or maintains what | California source |
|---|---|---|---|
| Master meter | The serving utility, which bills the community for the total | For gas and electricity, the community maintains and repairs its submeter system past the master meter | Pub. Util. Code § 739.5(a), (d); Civ. Code § 798.40(c)(1)(A) |
| Submeter | The community, or a meter-reading or billing company it hires; the community or its billing company bills each resident | The community: it maintains and repairs gas and electric submeter facilities, and owns and operates water submeters | Pub. Util. Code § 739.5(d); Civ. Code § 798.40(a)–(b), (d) |
| Direct-service gas or electric meter (no master meter) | The utility, which bills the resident directly | The utility, up to and including the meter at the home | CPUC D.14-03-021; Pub. Util. Code § 2791(c) |
How a Master-Metered Community Bills Its Residents
- The utility bills the community for everything its master meter measured in the period.
- The community records each submeter's opening and closing readings for the period.
- The community works out each home's charge from its readings, by the method the law allows for that utility.
- Each resident gets a statement that shows the readings and the charge, each utility on its own line.
The pricing rule depends on the state and the utility. In California (where an investor-owned utility means a privately owned gas or electric company regulated by the California Public Utilities Commission):
- Gas and electricity from an investor-owned utility (including power bought through a local community-choice program) are charged to each resident “at the same rate that would be applicable if the user were receiving gas or electricity, or both, directly” from the utility (Cal. Pub. Util. Code § 739.5(a)). The utility sells to the community at a lower master-meter rate; the difference is set, uniformly for all master-meter customers, to cover their reasonable average cost of providing submeter service, but no more than the utility would have spent providing comparable service to the residents directly (same subdivision).
- The community gives each resident an itemized gas or electric bill generally in the form of the utility's own, including the opening and closing readings and the rates and quantities for each price step (block) of the rate (Cal. Pub. Util. Code § 739.5(e)).
- Submetered water or sewer bought from a water company through a master meter is billed only by the methods the Civil Code lists, such as the home's metered share of the community's own water bill, with common-area water left out (Cal. Civ. Code § 798.40(c)), and each statement shows the opening and closing readings (§ 798.40(a)).
Where a community has no submeters, it cannot bill from readings: it keeps the utility in the rent, passes through a flat charge the utility assesses, or, where the law allows, shares the bill by formula; see our RUBS utility billing guide.
How Meter Testing and Accuracy Work
The general rule: NIST Handbook 44
The national reference for how accurate a commercial measuring device must be is Handbook 44, published by NIST (the National Institute of Standards and Technology, a federal agency). Its specifications and tolerances are those adopted by the National Council on Weights and Measures, which recommends them for the states to adopt and use (NIST Handbook 44 (2026), Introduction). Each state decides whether to adopt it. Two of its codes cover water meters and gas submeters:
- Water meters, including utility-type meters installed in homes, must register within 1.5 percent, over or under, on a normal test; on special tests at the minimum flow rate the under-registration limit is wider (5.0 percent, or 3.0 percent each way for multi-jet meters) (Handbook 44, § 3.36, Table T.1).
- Gas submeters measuring gas at low pressure must register within 1.5 percent over and 3.0 percent under (Handbook 44, § 3.33, Table T.1). The code does not apply to gas meters operated in a public utility system (§ 3.33, A.2(b)).
California's rule
California requires commercial weighing and measuring devices to conform to the latest Handbook 44, except where its own regulation provides otherwise, and to its additional requirements (Cal. Code Regs., tit. 4, § 4000). Its inspection regulation sets 10 years as the maximum time between inspections by a sealer of weights and measures (the official who checks measuring devices), which include trying and testing the device, for three kinds of submeter: electric watt-hour submeters, hydrocarbon vapor (gas) submeters, and domestic-service water submeters (Cal. Code Regs., tit. 4, § 4070, Table 1). Inspections may come sooner if the device user asks, during a complaint investigation, or on the sealer's own initiative (same section). The regulation sets a maximum interval; it does not require any particular share of meters to be tested each year. Our mobile home park submetering guide covers testing, reading and statements from the operator's side.
Direct Utility Service vs. a Master Meter
With direct service, the utility has a meter at each home and bills each resident itself. The community has no billing role for that utility. With a master meter, the community stands between the utility and every resident: it pays the utility, reads the submeters, bills the residents and maintains the lines past the master meter.
In California, two rules push gas and electricity toward direct service:
- California law requires that residents of communities constructed after January 1, 1997 be individually metered and served by gas and electric facilities owned, operated and maintained by the serving gas or electric company (Cal. Pub. Util. Code § 2791(c)).
- The owner of an older master-metered community may transfer its gas or electric system to the serving investor-owned utility, under the statute's procedures or by agreement with that utility (Cal. Pub. Util. Code § 2791(a)). The California Public Utilities Commission (CPUC) set up a voluntary three-year pilot to encourage these conversions in Decision 14-03-021 (March 13, 2014), with a good-faith, best-efforts target of converting about 10 percent of the mobilehome spaces in each utility's territory and the cost recovered in utility rates. In Decision 20-04-004 (April 16, 2020) it made this a ten-year utility conversion program, beginning in 2021, with a goal, subject to voluntary participation and counted from the pilot's start in 2015, of converting 50 percent of the master-metered spaces served by the large gas and electric utilities, and all of those served by the smaller ones, by the end of 2030. That decision set a first application cycle for 2021 to 2024 and an evaluation in 2025; the serving utility can say whether applications are open now.
After a conversion, the utility owns and operates the facilities up to and including each home's meter, and the community owns and maintains the facilities from the meter to the home (Decision 14-03-021, quoting the summary of the terms by Pacific Gas and Electric Company, PG&E).
Frequently Asked Questions
What is a master meter?
A master meter is a single utility meter that measures the gas, electricity or water delivered to a whole community, or a group of homes, rather than to one home. The utility bills the community for what it measured, and the community then bills each resident.
What is a submeter?
A submeter is a meter at one space (the lot a home sits on), past the master meter, that measures that one home's use. The community, or a meter-reading or billing company it hires, reads each submeter and bills the resident from the reading.
What is a submeter for water?
A water submeter measures the water used at one space in a community that buys its water through a master meter. California's Civil Code defines it as a device that measures one space's water use and that management owns and operates (Cal. Civ. Code § 798.40(d)(2)).
What is an electric submeter?
An electric submeter is a watt-hour meter at one space that measures the electricity that home used, in kilowatt-hours (the measure electricity is sold by), past the community's master meter. California's weights-and-measures regulation lists it as an electric watt-hour submeter (Cal. Code Regs., tit. 4, § 4070, Table 1).
Who is responsible for repairing submeters?
For gas and electricity, the community is: in California every master-meter customer is responsible for maintaining and repairing its submeter facilities past the master meter, and nothing in that section requires the utility to repair them (Cal. Pub. Util. Code § 739.5(d)). A water submeter is, by California's definition, owned and operated by management (Cal. Civ. Code § 798.40(d)(2)).
How often must submeters be tested in California?
A sealer's inspection is due at least once every 10 years. California's regulation sets 10 years as the maximum time between inspections by a sealer of weights and measures (the official who checks measuring devices), which include trying and testing the device, for electric watt-hour submeters, gas (hydrocarbon vapor) submeters and domestic water submeters (Cal. Code Regs., tit. 4, § 4070, Table 1).
How accurate does a water meter have to be?
Within 1.5 percent, fast or slow, on a normal test. NIST Handbook 44 sets an acceptance and maintenance tolerance of 1.5 percent for over-registration and under-registration of water meters; on special tests at the minimum flow rate, the under-registration limit is wider (5.0 percent, or 3.0 percent each way for multi-jet meters) (Handbook 44, Section 3.36, Table T.1).
Can a mobile home park (manufactured housing community) switch from a master meter to direct utility service?
In California, yes, for gas and electricity. The community's owner may transfer the gas or electric system to the serving investor-owned utility, under the statute's procedures or by agreement with that utility (Cal. Pub. Util. Code § 2791(a)), and the California Public Utilities Commission set up a voluntary conversion program, with the cost recovered in utility rates, as a pilot in Decision 14-03-021 (2014) and as a ten-year program beginning in 2021 in Decision 20-04-004 (2020).
Sources
Every statement of law above cites its section, and every accuracy figure cites the edition of Handbook 44 it comes from. Sources read on November 14, 2026.
- Cal. Pub. Util. Code § 739.5 — master-metered gas and electric service
- Cal. Pub. Util. Code § 2791 — transfer of master-metered systems, and direct service in communities built after January 1, 1997
- Cal. Civ. Code § 798.40 — statements, rate posting and submetered water
- Cal. Code Regs., tit. 4, § 4000 — California adopts NIST Handbook 44
- Cal. Code Regs., tit. 4, § 4070 — inspection frequencies, including submeters (Table 1)
- NIST Handbook 44 (2026), Introduction
- NIST Handbook 44 (2026), Section 3.33 — Hydrocarbon Gas Vapor-Measuring Devices
- NIST Handbook 44 (2026), Section 3.36 — Water Meters
- CPUC Decision 14-03-021 (March 13, 2014) — the voluntary conversion pilot
- CPUC Decision 20-04-004 (April 16, 2020) — the ten-year conversion program